(Click here for larger image)

The DLoG X 7 is based on a 520 MHz PXA270 processor with 64 MB of RAM and 64 MB of Flash. The 7-inch touchscreen display operates in both portrait and landscape modes, and optional mounting brackets are available for both orientations, according to DLoG. Interface ports include two serial and two USB. Wired and and wireless networking can optionally be added through the device's PC Card and SDIO slots.


DLoG X 7 in landscape mode
DLoG lists the following key features and specifications for the DLoG X 7:

• Processor -- Intel PXA270 at 520 MHz
  
• Memory -- 64 MB RAM, 64 MB Flash
  
• Display:
  • 7-inch TFT with analog resistive touchscreen
    
  • 480 x 234 resolution
    
  • Portrait or landscape modes
• Storage -- SD card slot up to 512 MB
  
• I/O ports:
  • 2 USB 2.0, one with OTG support
    
  • 2 serial RS232 -- one port can optionally be supplied as galvanically isolated RS422/485
• Expansion:
  • PC card slot -- 16-bit, Type I/II
    
  • SDIO slot -- 1- or 4-bit, up to 78 Mbps data transfer rate
• Dimensions -- 8.94 x 6.2 x 3.27 inches (227 x 158 x 83 mm)
  
• Environmental:
  • Sealed to IP54, IP65 optional with correct assembly of cable cover
    
  • Shock and vibration -- Class 7M3 according to EN 60721-3 (1995)
    
  • Operating temperature:
    • -22 to +122 degrees F (-30 to +50 degrees C)
      
    • 32 to +122 degrees F (0 to +50 degrees C) while charging battery
• Terminal emulations:
  • VT100, VT220, IBM 5250
    
  • Citrix ICA Client
    
  • RDP Client
    
  • Ericom Power Term

DLoG says the X 7 can also be supplied with embedded Linux.

---

Related stories:

• Rugged vehicle-mount computers run Windows CE, XPe
  
• Rugged vehicle computer sports SVGA display, runs Windows CE
  
• Forklift computer runs Windows Embedded
  
• Rugged in-vehicle computer supports Windows Embedded
  
• In-vehicle PC gains Pentium M CPU, runs XP
  
• Rugged vehicle mount computer runs Windows CE
  
• Vehicle-mount Windows CE computers enjoy cold weather