-
your Windows® embedded community
Windows For Devices
your Windows® embedded community
The result, according to HP officials, is a technology that will perform better than the current flash technology found on such devices as mobile handsets. It will be 100 times faster, significantly smaller, and consume a 10th of the energy, they add.
"This is going to change the memory industry," Stan Williams, an HP Senior Fellow and founding director of the Information and Quantum Systems Lab, said in a video (embedded at the end of this story) on the HP Website. This is going to allow us to continue scaling -- in other words, go to higher and higher densities -- as [the industry did] with flash, but actually with a product that has the capability and capacity, we all believe, to replace both hard disks and DRAM memory in computers."
The memristor -- short for memory resistor -- is viewed by HP engineers as the fourth basic circuit element in chip engineering, up there with resistors, capacitators and inductors. At its core, the memristor is a resistor with memory.
The idea behind the memristor was first broached in 1971 by Prof. Leon Chua at the University of California Berkeley. HP researchers first reduced the memristor to practice, showing its existence.
Two years later, the journal Nature published the companys finding that the memristor exists, and in 2009, engineers at HP Labs showed that memristors could be stacked, suggesting that a chip could offer four to eight times the memory capacity of traditional technologies.
In April, HP officials said company researchers found that the memristor also could perform digital logic, setting the stage for the creation of a memristor product that could act as both a computing chip and as a storage technology, taking the place of traditional storage technologies -- including flash and hard drives -- and CPUs.
"Memristive devices could change the standard paradigm of computing by enabling calculations to be performed in the chips where data is stored," Williams said in April. "Thus, we anticipate the ability to make more compact and power-efficient computing systems well into the future, even after it is no longer possible to make transistors smaller via the traditional Moore's Law approach."
Memristor technology is a form of nonvolatile memory that HP officials believe will be able to be used in everything from mobile phones and MP3 players, which primarily use NAND flash memory now, and as a replacement for storage technology such as SSD (solid-state disk) and DRAM.
Memristors, which not only use less energy than other memory devices and can retain information when the power if off, are built from metal oxides like titanium dioxide, rather than silicon.
"The memristor has storage capacity abilities many times greater than what competing technologies offer," S.W. Park, executive vice president and CTO at Hynix, said in a statement. By adopting HPs memristor technology, we can deliver new, energy-efficient products to our customers more quickly."
Further information
For background information on HP's work with memristors, see a detailed article by eWEEK's Chris Preimesberger, here. A blog entry announcing the joint development agreement with Hynix may be found here.
Jeffrey Burt is a writer for our sister publication eWEEK.
