industrial control, according to the company.
(Click here for larger image)The EM-6330 is designed around a 500 MHz AMD Geode LX800 processor, and is equipped with a single SODIMM socket that accommodates up to 1 GB of DDR SDRAM, according to Aewin. The SBC provides display outputs for driving both CRTs and TFT LCDs, and 18- or 24-bit LVDS displays are supported via add-on modules.
Aewin lists the following key features and specifications for the EM-6330:
- Processor -- Geode LX800 up to 500 MHz
- Chipset -- Geode CS5536 plus Winbond 83627HG
- Memory -- 200-pin SODIMM socket supports up to 1 GB DDR RAM
- Display:
- video memory shared with system memory between 2 and 254 MB
- CRT resolution to 1920 x 1440, 32-bit color at 85Hz
- 24-bit TFT LCD out
- simultaneous LCD/CRT mode -- 1024 x 768, 16-bit color at 60 Hz
- Storage:
- CompactFlash type II socket on back of board
- SATA option -- VIA VT6421A SATA RAID controller
- supports 2 EIDE ATA 133 devices and 2 SATA devices
- without SATA option -- supports one ATA 66 device
- I/O ports with connectors:
- dual 10/100 Ethernet, choice of Intel 82551ER or Realtek 8139CL controllers
- 2 USB 2.0
- RS232 serial
- I/O ports on pin headers:
- 2 USB 2.0
- serial -- 2 RS232, 1 RS232/422/485
- parallel port
- PS/2 keyboard and mouse
- IrDA serial port
- 8 digital I/O
- Expansion -- PC/104 connector
- Power +5V @ 2.4A
- Dimensions -- 5.7 x 4 inches (145 x 102 mm)
The other two boards in Aewin's 3.5-inch SBC line run Intel and Via processors.
Related stories: 
