-
your Windows® embedded community
Windows For Devices
your Windows® embedded community
According to MSC Vertriebs, the Q7-TI8168 (above) gets its graphical chops from TI's TSM320C6A8168 Integra, which combines a 1.5GHz ARM Cortex-A8 core with a 1.5GHz digital signal processor (DSP). Also including a graphics accelerator based on Imagination Technologies' SGX530 IP, the TI chip supports dual HD displays and peripherals including PCIe, gigabit Ethernet, USB 2.0, and HDMI.
You'll find more information on the TSM320C6A8168, including a block diagram and spec table, in our detailed previous coverage (plus links to stories on some of TI's many other ARM-plus-DSP chips at the end of this story).
Regarding the Q7-TI8168 module itself, MSC hasn't yet posted a product page or data sheet, but the company's release offered the following additional specs:
Purchasers of COMs increasingly want them to come with ARM processors, not x86 -- or so vendors seem to agree. Last September, for example, Kontron announced an ARM-focused module format, and Adlink said Dec. 8 it would use this to offer a range of sub-$100 COMs in 2012.
The Kontron/Adlink format (still un-named) will permit the creation of full-sized (82 x 80mm) or half-sized (82 x 50mm) modules, according to the company. Meanwhile, the existing Qseven format (below) bridges the size gap, measuring 70 x 70mm (2.75 x 2.75 inches) .
When it was originally devised, Qseven only supported x86 processors. However, the Qseven Consortium -- founded by Congatec, MSC Vertriebs, and Seco, and now with many other members that do not, however, include Adlink or Kontron -- added ARM support into the Qseven 1.2 spec as of September 2010. Subsequently, MSC released its Nvidia Tegra-based Qseven module, the MSC-Q7-NT2 (pictured below).
Qseven modules are, of course, entirely dependent on carrier boards to convey signals to and from the outside world. Last December, MSC released the Q7-MB-EP4 baseboard, pitching it as the ideal partner for the MSC-Q7-NT2. That board, pictured below, is now said to be compatible with the Q7-TI8168 as well.
The Qseven module slot isn't visible in the picture above because it has been placed on the board's solder side, making it easier to thermally connect a heat spreader to a device's metal enclosure, MSC Vertriebs says.
Measuring 5.8 x 4 inches (148 x 102mm), the Q7-MB-EP4 has real-world ports on its coastline that consist of a DVI video output, four USB 2.0 ports, and two gigabit Ethernet ports (one of the latter is driven by an Intel 82547L controller on the board; the other is linked to a controller on the Qseven module). It also includes headers for an RS232 port, CANbus, LVDS video, and an optional 4/5-wire resistive touchscreen controller, MSC says.
According to MSC, the Q7-MB-EP4 also has an MMC/SD slot and an mSATA slot. Accepting 10~28VDC power, the board works in temperatures ranging from 32 to 140 deg. F, the company adds.
Further information
More information on MSC's Q7-MB-EP4 carrier board may be found on the Q7-MB-EP4 product page. Information on the Q7-TI8168 module hadn't been posted at the time of writing, but should become available from MSC's Qseven product page.
Jonathan Angel can be reached at jonathan.angel@ziffdavisenterprise.com and followed at www.twitter.com/gadgetsense.
