The AM1810 Sitara is said to be optimally suited for use in programmable logic controller (PLC) or human machine interface (HMI) applications. The SoC is based on the Sitara AM1x line of ARM9 processors TI announced in April.

The processor appears to be identical to the top-of-the-line AM1808 model, except for the addition of the Profibus interface as well as EtherCAT Master protocol support.

In conjunction with the AM1810 Sitara's release, TI noted that it has joined the Profibus International (PI) organization. Profibus is an industrial fieldbus such as CANopen and LONworks, billedby TI as "the world's most popular fieldbus used for communicationsbetween factory automation equipment."

The TI Profibus DP slave implementation used on the AM1810 Sitara has earned PI certification via ComDeC, a Profibus Certification Lab hosted by Siemens AG, says TI.By integrating a Profibus interface in the AM1810, directly linking it to the RS-485 transceiver, there is no need for an external Profibus device, ASIC, or FPGA, says the company. This is said to save development time and cost while improving system performance.

Customers can also design smaller enclosures and housings with simpler thermal designs due to the AM1810 SoC's low power architecture, says TI. The thermal advantage is claimed to further reduce total bill of materials (BOM) savings to up to 30 percent.

Customizable PRU spawns Profibus interface

Unlike the flagship, Cortex-A8-based Sitara AM3505 and AM3517 SoCs announced in October 2009, the industrial-focused AM1x Sitara processors use more modest 375MHz to 450MHz ARM9 cores, and lack video acceleration DSPs (digital signal processors) or OpenGL ES 2.0-based PowerVR SGX graphics accelerators.

AM1810 Sitara block diagram
(Click to enlarge)

What they do provide is a unique PRU universal controller, which combines dual 32-bit RISC microcontrollers to offer greater flexibility in configuring I/O control and adding custom interfaces, says TI. In addition, the PRU (seen on the right side of the block diagram above) offloads processing duties from the ARM9. This is said to improve application processing capacity, thereby reducing power consumption, eliminating latency, and improving real-time responsiveness.

On the AM1810, the PRU is used to implement the Profibus real-time frame handler, called the Fieldbus Data Link (FDL). The PRU is tightly coupled with the ARM core through an on-chip system bus, yielding shorter control cycle time and increased system response time compared to a standard Profibus interface, says TI. The device is claimed to offer decentralized peripherals (DP) communication at up to 12 MBaud.

The Profibus node can even run without external memory, booting through serial flash and running on internal RAM, says the company. An operating system (OS) abstraction layer, meanwhile, is said to make the Profibus DP protocol stack independent of the OS.

The AM1810 Sitara ARM MPU also supports the EtherCAT Master protocol on its integrated Ethernet port. This allows industrial designers to develop products with multi-protocol support, says the company.

An AM1808 with a dash of Profibus

As noted, the AM1810 otherwise appears to be identical to the AM1808. The AM1810 has its ARM926EJ-S core clocked to 375MHz, and offers an Enhanced Direct-Memory-Access Controller 3 (EDMA3), as well as dual external memory interfaces, says TI.

I/O includes a 10/100 Ethernet MAC and both a USB 2.0 on-the-go (OTG) and USB 2.0 Host interface, says TI.Other interfaces include I2C, SPI, UART, PWM, eCAP, McASP, and SATA, says the company. (For more details on the AM1810 Sitara, see the datasheet link at the end of the story, as well as our earlier coverage of the AM1808, here.)

TMDXEVM1810 evaluation module
(Click to enlarge)

In addition, Texas Instruments announced a $995 TMDXEVM1810 evaluation module (EVM), pictured above. The EVM extends many of the AM1810's interfaces as real-world ports. It also includes a touchscreen LCD, and integrates a Profibus transceiver board, says TI. Other features are said to include 128MB of DDR2 SDRAM, 8MB of flash memory, an MMC/SD slot, and audio/video I/O.

The module ships with a software development kit (SDK) that includes support for Windows CE as well as Linux 2.6.33. Additional SDK features include a PRU configuration tool, PRU CAN, PRU UART, and touchscreen demo, says TI.

In addition to the EVM, TI Design House partner Critical Link LLC offers a "production-quality" industrial ETX standards based development board equipped with an AM1810 Sitara processor priced at $749, says TI. The ETX board ships with a real-time Linux (RTL) kernel board support package with the Profibus demonstration and evaluation software.

Stated Ram Sathappan, industrial end equipments manager, Texas Instruments, "We are very excited to be a member of PI and introduce our certified AM1810 Sitara ARM MPU Profibus solution to the industrial market. Our aim is to help our customers reduce BOM costs, PCB space and design time."

Further information

The AM1810 Sitara ARM MPU with Profibus is now available for sampling at $9.95 in 1,000 unit quantities (1ku) from TI and TI authorized dealers. More information, including a datasheet, may be found here.

The TMDXEVM1810 evaluation module (EVM) appears to be available now for $995. More information may be found here.

More information on TI's automation solutions may be found here, and more the ComDeC certification for Profibus may be found at Siemens, here.

---

Related Stories:

• ARM9 SoCs feature programmable I/O controller
• DIN rail PC offers choice of field buses