| AMD stirs Athlon technology into Geode embedded soup |
May 24, 2004
AMD, which in recent months has gained ground against Intel in the battle for the desktop, today announced the addition of a line of high-performance, low-power embedded processors to its Geode embedded x86 processor family. The new processors will be known as the "Geode NX 1500@6W" and the "Geode NX 1750@14W," reflecting a new naming convention based on relative performance and power consumption. AMD has committed to offer them a minimum of five years.
The Geode NX 1500@6W processor operates at 1GHz and the Geode NX 1750@14W operates at 1.4GHz. The two new embedded processors are essentially identical to AMD's Mobile Athlon processors, including packaging, but with tweaks to process technology and transistor selections that result in lower power consumption at reduced clock rates. Both new Geode NX processors are "100 percent socket and chipset compatible" with AMD's "Socket A" Athlon XP processors, according to an AMD spokesperson.
In short, the NX processors are the same chips as the Mobile Athlon, but with differing performance/power points. They won't take business away from AMD's Mobile Athlons, because they're too slow to be of interest in the laptop market, the spokesperson said.
In terms of market focus, AMD says it is targeting its new high-performance, low power NX processors at "high-end embedded applications" such as thin clients, high-end printers, point-of-sale systems, information and transaction kiosks, and telecommunications and networking equipment. Additionally, with its 6 Watt typical power consumption, the Geode NX 1500@6W processor is suitable for fanless applications.
"Extremely low power" Geode processors renamed
In conjunction with the addition of the two respun Athlon processors to its Geode embedded processor family, AMD is renaming the previously introduced Geode processors that are derived from its recent acquisition of National Semiconductor's Geode processor assets. Specifically, AMD is renaming the current Geode GX2 processors to "Geode GX 533@1.1W," "Geode GX 466@0.9W," and "Geode 500@1.0W."
The Geode GX 533@1.1W processor operates at 400MHz and is supported by the AMD Geode GX DB533 development board. The Geode GX 500@1.0W processor operates at 366MHz and the Geode GX 466@.9W processor operates at 333 MHz.
Five year commitment
AMD says it has made agreements with chip fabrication plants to ensure that it will be able to deliver NX and GX Geode chips for a minimum of five years. AMD makes most of its own chips, but needs to out-source older designs as the technology in its own plants outstrips the capability to produce older designs, it says.
Model numbering philosophy
AMD says its new model numbers are based on benchmarks developed by Synchromesh Computing. The scheme consists of the processor's family name (Geode NX or Geode GX) followed by its performance rating, followed by its power usage. Performance ratings reference performance relative to VIA's Centaur processors.
"Using the model numbers, customers can determine if they need an extremely low-power solution as offered by our AMD Geode GX line, or a high-performance embedded solution that is now addressed with our AMD Geode NX product offering," said Iain Morris, group vice president, AMD Personal Connectivity Solutions Group. "We are committed to providing long-term support to our customers who require low-power, high-performance embedded solutions with the AMD Geode Solutions product line."
AMD's embedded MIPS line
In addition to its recent acquisition of National Semiconductor's Geode processor family, AMD earlier acquired a family of MIPS architecture RISC processors from Alchemy Semiconductor.
AMD's Alchemy embedded processors, including the Au1000, Au1100, Au1500, and Au1550, compete with Intel's XScale processor family in handheld and mobile applications.
Geode development boards and chip pricing
AMD provides development boards, which are intended to serve as "complete hardware and software" reference designs for embedded applications, for all of its Geode embedded processors.
The Geode NX DB1500 development board supports both the the NX 1500@6W processor and the NX 1750@14W processor. The Geode GX DB533 development board supports the GX 533@1.1W processor, the GX 466@.9W processor and the GX 500@1.0W processor.
The Geode family processors are priced as follows (10K quantities): - Geode GX 466@0.9W - $26.50
- Geode GX 500@1.0W - $29.10
- Geode GX 533@1.1W - $32.75
- Geode NX 1500@6W - $65.00
- Geode NX 1750@14W - $55.00
The development boards are priced as follows (single units): - Geode GX DB533 - $650.00
- Geode NX DB1500 - $500.00
Related stories:
(Click here for further information)
|
|
|
7 Advantages of D2D Backup
For decades, tape has been the backup medium of choice. But, now, disk-to-disk (D2D) backup is gaining in favor. Learn why you should make the move in this whitepaper.
4 Legal Reasons to Control Internet Access
The Internet is obviously a valuable resource for many organizations. However, many are exposed to legal liability concerns because they fail to control Internet access. Learn if you're safe in this white paper.
Rapidly Resolve J2EE Application Problems
Whether you are in the process of building J2EE applications or have J2EE applications already running in production, you must ensure that they deliver the expected ROI. Learn how in this white paper.
Load Testing 2.0 for Web 2.0
There are many unknowns in stress testing Web 2.0 applications. Find out how to test the performance of Web 2.0 in this white paper.
Build Better Games Online
For the game infrastructure providers, life is complex. Making money from games has become more complicated. Why? Find out in this white paper.
Building a Virtual Infrastructure from Servers to Storage
This white paper discusses the virtual storage solutions that reduce cost, increase storage utilization, and address the challenges of backing up and restoring Server environments.
Gaining Faster Wireless Connections with WiMAX
Welcome to what is quickly becoming the hyperconnected world where anything that would benefit from being connected to the network will be connected. Learn more in this white paper.
Is Your Desktop a Security Threat?
The new wave of sophisticated crimeware not only targets specific companies, but also targets desktops and laptops as backdoor entryways into those business’ operations and resources. Learn how to stay safe in this white paper.
Increasing SAN Reliability by 100 Percent
Storage area networks (SAN) are a strong part of storage plans. Learn how to increase your reliability and uptime by 100 percent in this case study.
|
|
|
|
|
Use of this site is governed by our Terms of
Service and Privacy Policy.
Except where otherwise specified, the contents of this site are copyright © 1999-2008
Ziff Davis Enterprise Holdings Inc. All Rights Reserved.
Reproduction in whole or in part in any form or medium without express written permission of Ziff Davis Enterprise is
prohibited. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries and is used by WindowsForDevices under license from owner. All other marks are the property of their respective owners. WindowsForDevices is an independent publication not affiliated with Microsoft Corporation.
news feed